You have no items in your shopping cart.
Online Catalogue
Request a Catalogue
Carburettor Cleaning Aerosol Spray 400ml
Carburettor Cleaning Aerosol Spray
500ml
STP Professional Heavy Duty Carb Spray Cleaner is formulated to swiftly dissolve gum, sludge, varnish, grease and dirt from carburettor linkages and automatic chokes.
Regular use helps prevent the build-up of contaminants.
- Prevents dirt accumulation
- Removes grease and grime
- Keeps carburettor linkages and automatic chokes clean
- Suitable for both retail and trade
Usage Directions
Begin cleaning with the engine cool or only slightly warm.
For Carburettor and Carburettor Linkage
Remove the air cleaner and spray STP® Carb Spray Cleaner over the entire exterior of the carburettor, including the linkage and choke (valve) shaft. Let it soak for one minute, then reapply to fully remove dirt, grease, and deposits.
For Automatic Chokes
To clean the automatic choke, spray both ends of the choke valve while moving it open and closed by hand. Then spray the vacuum cylinder to remove dirt and gum. Start the engine and apply STP® Carb Spray Cleaner in short bursts inside the carburettor throat to remove deposits from the throttle plate area and other components.
Usage Frequency: Use as required.
| Datasheets |
|---|
